Single or Dual Slide
Gate Openers - GTO/PRO SL-1000B
Low voltage swing gate operator |
• Solar
compatible—with optional battery kit.
• Adjustable: obstruction sensing, auto closing and gate sequencing
• Compatible with all GTO/PRO® and Linear™ accessories
• Dependable—Versatile—Affordable
• Easy installation for a multitude of applications
• 24 month Limited Warranty
• System certified to be in compliance with UL 325, 4th edition |
 |
| Features
... |
|
Benefits
... |
• Handles gates up
to 30' (9.1 m) long, with 20’ (6.1 m) opening, up to 500 lbs.
(226.8 kg) each leaf, for single or double gates.
• Heavy Duty SL-1000B Series Control Board provides adjustable
obstruction sensing in both open and close modes; adjustable auto
closing; adjustable gate sequencing.
• Heavy duty transformer.
• Fully systems capable; “add on ready.”
• Compatible with a variety of accessories.
• Solar option available.
• Mounting legs standard; concrete pad mounting available. |
|
• Increases the number
of applications where operator(s) can be used.
• Extreme resistance to lightning and static.
Dependable. Versatile. Affordable.
• Excellent for heavy traffic areas.
• Provides safe, economical low voltage operation.
• Provides more options: works with all accessories, or any
accessory that will work with a 12 volt system or that has its own
power supply.
• Economical, no need to run power to gate with solar application;
Ideal for remote locations.
• Easy installation for a multitude of applications. |
| DRIVE
|
| |
• Powered
by a 12 volt motor with integral case hardened steel gear reduction
to 90 RPM. Generates 155 inch pounds torque at 12 volts. Temperature
rating of motor -30o F (-34o C ) to +160o F ( 93o C).
• Opening time is approximately one foot per second.
|
 |
| POWER |
| |
• The GTO/PRO SL-1000B
system is powered by a 12 volt DC / 7.0 amp hour, sealed, rechargeable
battery.
• Battery charge for GTO/PRO SL-1000B is maintained by a 120
volt AC / 60 hertz input and 18 volt AC at 40 VA (2.9 amperes) output
transformer rectified to 14 volt DC through the GTO Control Board.
Control board fuses are 15 amps.
NOTE: Transformer should not be connected directly to any battery.
NOTE: Do not replace fuses with larger fuses; this will void the warranty
and may damage the unit.
• Battery charge maintained by GTO Solar Panel Charger: float
voltage 14.5 volt DC output from a 193/8" (49.23 cm) x 151/4"
(38.74 cm) silicon alloy panel. Generates minimum of 10 watts at 600
mA. Gated diode on the control board prevents battery discharge.
|
| CONTROL |
| |
• GTO microprocessor
controlled board can be programmed to open left-to-right or right-to-left.
Adjustable auto close and obstruction sensitivity. Temperature compensated
circuits. Auto-memorization of digital transmitter code. Charging
regulated circuit on control board. "Sleep draw" is 40 mA;
"active draw" is 2 to 5 amps.
• GTO remote-mounted RF receiver tuned at 318 MHz.
• Limit controls are mechanical. Normally open contact.
• Fully compatible accessory terminal block provides connections
for safety loops, wands, intercoms, card readers, phone systems, etc.
|
| OPERATIONAL
CAPACITY |
| |
•
The GTO/PRO SL-1000B will handle gates weighing up to 500 lbs. (226.8
kg) and up to 30 ft. (9.1 m) in length (per leaf) if all proper installation
procedures have been followed. Note that ball bearing rollers and
covers should be used on all gates.
|
| Gate Capacity
Chart (estimated number of cycles based
on use with a transmitter) |
Gate
Length |
20 ft. |
120 |
110 |
100 |
90 |
| 16 ft. |
140 |
130 |
120 |
110 |
| 12 ft. |
160 |
150 |
140 |
130 |
| 8 ft. |
180 |
170 |
160 |
150 |
| |
200 lb. |
300 lb. |
400 lb. |
500 lb. |
| Gate
Weight |
|
| GTO/PRO SL-1000B
(FMS1000B) |
Designed for chain link, tubular steel
or ornamental iron gates.
• Two year warranty.
• Easy installation, no electrician required.
• Battery operated and will provide up to 50 cycles without
being charged (12 volt battery and control board included in
control box).
• Continuous operation AC transformer (optional solar charging
system also available).
• Fully systems capable and programmable for a wide range of
options.
• Improved design enhances safety. (Always read the safety instructions.)
• Internal lock included. This
built-in locking device locks the gate in the closed position and
automatically releases when the gate operator is activated by an entry
device.
• Will operate a gate up to 30 ft. (9.1 m) long with a 20 ft.
(6.1 m) opening, weighing up to 500 lbs (226.8 kg).
• Includes operator, mounting legs, AC transformer, receiver/antenna
with cable, entry transmitter, mounting hardware,
chain, installation manual, safety instructions, and warning signs. |
| GTO/PRO SL-1200B (FMS1200B) |
| • Designed to work as a slave unit with
the SL-1000B, for dual gates. Includes
second gate operator, mounting hardware, 60 ft. (18.29 m) connecting
cable, installation manual, safety instructions, and warning signs.
Opens gates up to 30 ft. (9.1 m) long each side with up to a 20 ft.
(6.1 m) opening. |
GTO/PRO-SL1000B
Accessories
|
