| Control
Board - The Unique Control Board uses state of the
art technology combined with ease of use to provide many exceptional
features not found in any other board
2 Wire Maser/Slave - The board uses a unique
Master/Slave system that requires only two wires.
Motor Brake - If the on position is selected,
the gate will stop instantly when it reaches the limit switches.
This is essential on uphill/downhill applications and on all
Fail Safe operations.
Stop-Reverse - This radio feature allows
the transmitter to work as a three-button station and is useful
for partial opening. The first command opens the gate, the
second stops the gate, and the third command will close the
gate.
Timer - The adjustable timer can be set from
1 to 60 seconds, with a maximum run time of 60 seconds.
Overload - If the motor reaches the stall
amp for 3 seconds, it will automatically shut down.
ERD - If the gate hits an obstruction while closing,
it will re-open. If it hits an obstruction while opening,
it will stop, reverse 6 inches and stop again. The sensitivity
is adjustable separately for the open and close cycles. |
|
Global Inputs - The Diamond board's Global
Inputs include key switch, key pad, exit loop, edge sensor,
open, stop, and close.
Outputs - Outputs include on board 24 VDC
for MAG Lock, alarm, and 24 VAC auxiliary power.
Receiver - The Receiver Terminal is mounted
on the control box for easy installation and is pre-wired
for a 3-wire or 4-wire receiver.
Safety Alarm - If the gate hits an object
twice while closing or opening, the system will shut down
for 5 minutes. On the control board you have two options for
reset mode. Selecting the off position will require a manual
reset of the board if the previous happens. However, by selecting
the on position, the system will automatically reset itself.
120 VAC Power Outlets - The gate opener has
an easy accessible power disconnect switch that allows for
easy installation and service.
Warranty - Five Year residential use. |
